Beam Saw XY 430 L
Controlled axes panel sizing centre
The new XY 430 L with 6 controlled axes has been designed to offer the maximum productivity and flexibility.
The new XY 430 L with 6 controlled axes has been designed to offer the maximum productivity and flexibility required by the market.
Thanks to the sturdy mobile grippers on the X and Y axes, it allows you to work several panels of different sizes at the same time when performing cross cuts, considerably reducing the work cycles.
The secondary pusher is able to preload the panels taken from the lifting table and to work in masked time during the sectioning performed by the primary pusher.
The massive lifting table is supported by 4 independent columns and allows to load stacks of panels up to 1200 mm in height.
Extreme rigidity and sturdiness, units with high speeds (up to 200 m/min) make the XY 430 L the ideal machine for the most demanding companies.
Beam Saw XY 430 L
|Description||Unit of measurement||XY 430 L|
|Maximum panel dimension manual loading||mm||4280 x 4300|
|Maximum panel dimension automatic loading||mm||4250 x 2300|
|Main saw diameter||mm||Ø450 x Ø75|
|Scoring saw diameter||mm||Ø200 x Ø50|
|Max Working speed||m/min||150|
|Max Blade return speed||m/min||200|
|Main saw motor power||kW||18.5|
|Max panel stack height||mm||1200|
“X” and “Y” sturdy mobile grippers can work different sizes at the same time decreasing the number of crossing cut cycles.
Stability and locking force thanks to compact and robust grippers.
The cut is precise with the scoring and the main blade controlled independently. Automatic adjustment of the main saw projection to the stack height.
Ascent and descent of the blade with controlled axis for the creation of grooves in the lower part of the panel.
Smart pressure beam with double pneumatic system always ensures perfect sealing of the pack and reduces processing times.
Side-alignment system with double rollers.
Air floating system for minimizing the friction between the workpiece and working table.
Simple and intuitive software for the management of the machine as well as management of the warehouse of raw panels, the optimization of the cuts based on the imported list, the management of leftovers and the possibility of creating and designing labels for bar-code or QR code.