Boring Machine 23
Semiautomatic, multispindle, single-head boring machine.
For horizontal and vertical drilling into wood-based panels and solid wood, for the furniture manufacturing.
MAGGI 23
For horizontal and vertical drilling into wood-based panels and solid wood, for the furniture manufacturing.
- Small footprint:1 sqm
- Two times faster than a manual boring machine
More than 20.000 machines manufactured, over thirty years' experience. 100% made-in-Italy machines abiding by the highest quality standards as a result of the "Lean" manufacturing process, also known as "Toyota System".
Boring system MAGGI 23
Details
Spindles | N. 23 |
Left and right spindles | N. 11 - N. 12 |
Spindle interaxis | 32 mm |
Total interaxis | 704 mm |
Max. tool diameter | 40 mm |
Max. boring deptd | 65 mm |
Max boring height | 55 mm |
Height of working table | 860 mm |
Dimensions of the working table | 949 x 350 mm |
Max. panel thickness (optional*) | 60 mm (130 mm*) |
Max. panel dimensions | 900 x 3000 |
Motor | HP 2 / KW 1,5 - RPM 2800 |
Standard pneumatic pressure | BAR 6/8 |
Air consumption per working cycle | 10 NL |
Dust collection hood diameter | 80 mm |
Overall dimensions - net weight: | 1285 x 872 x 1300 mm |
Package dimensions (machine) | 1115 x 950 x 1050 mm |
Rod packaging size | 1500 x 120 x 60 mm |
Gross weight | 301 Kg |
Net weight | kg 271 |
- Quick-change spindles
- 32 mm interaxis
- Pneumatig head rotation from 0° to 90°
- Well-dimensioned working table made of steel
- Boring-height adjustment on numeric counters
- Ready to be connected to a dust-collector
- Manufactured according to EC standards
- N. 1 - 2HP Motor
- N.2 patented safety hold-down clamps
- N.5 quick-change chucks
- N.2, 1500 mm long, aluminium fences, with 4 ref. stops
- N.2 removable side-fences on working table, adjustable on high-precision numeric counters
- N.2 fixed ref. stops at 37 mm for hinges
- Boring-height adjustment on numeric counters
- Rear fence having 300 mm max. stroke
- Package: stackable carton box
- Ready to be connected to a dust- collector
- Manufactured according to EC standards
More information
Fast Horizontal Drilling
Thanks to the 704 mm interaxis and the large working table, You can process 2 panels having 348 mm width at the same time.
Fast Vertical Drilling
You can process 3000 mm - long sides in 4 working cycles.
Perfect Panel Joints
The ref. side fences, adjustable on numeric counters, always represent a precise reference point, quick to set-up, and guarantee perfect parallelism of the drilling operations.
Quick Set-Up
Adjusting the boring depth is extremely easy with the "Spyral System" device and the 10 mm automatic reset for vertical drilling.
Versatility
It drills at any angle between 0° and 90°.
Safe Panel Hold-Down
The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.
Productivity
Two times faster than a bench top boring machine.
Quick And Accurate Panel Positioning
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
Rear Fence
The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.
Fixed Stop For Hinges
The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.
Solid Structure
Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.
Quick And Accurate Panel Positioning
Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops.
Special Design To Work With Large-Diameter Drill-Bits
The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.
Accessories
Tool-tray
To keep Your drill-bits and tools tidy and always close at hand
CODICE: 26000014
Stand for the long fences
To keep Your fences always close at hand
CODICE: 26000010
Ref. stops to match the long panel
It keeps long working panels aligned for a more accurate drilling process
N. 2 ref. stops to match the long panel during transversal drilling
CODICE: 26001071
1000 mm long fence extension
To increase by 1 mt the length of the 2 standard fences (1,5 mt each) and carry out the in line drilling process on long panels
CODICE: 29970302
Blocks to lift the hold-down clamps up to 130 mm
To process beams having a maximum height of 130 mm
CODICE: 26001015
Set of two ref.stops for drilling at 45° and 90°
To drill mouldings and laths
CODICE: 26000069 A / 26000069 B
Set of n° 2 additional ref. stops
For an even quicker and more accurate set up
CODICE: 26028819
Additional hold-down clamp
To increase the hold-down pressure on the working panel and consequently its stability during the drilling process
N.1 additional hold-down clamp
CODICE: 29971019
Ref. pin for line drilling
To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt
Ref. pin for line drilling (1 piece)
CODICE: 29900100
Additional hold-down clamps
To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time
N.2 additional hold-down clamps
CODICE: 29971020
Ref. gauge for reaf fence parallelism
For a quick and accurate set-up of the rear fence
Ref. gauge for reaf fence parallelism ( 500 mm)
CODE: 26000061
Kit to join the two aluminium fences
To get one single 3mt long fence
Kit to join the two aluminium fences (1500 + 1500 mm)
CODE: 26028820
Drilling aggregate for hinges, type "Grass"
To drill the three hinge holes in one single working cycle
DRILL-BITS NOT INCLUDED
CODE: 00008395
CODE: 00008391
Drilling aggregate for hinges, type "Grass"
To drill the three hinge holes in one single working cycle
DRILL-BITS NOT INCLUDED
CODE: 00008392
Drilling aggregate for hinges, type "Hettich"
To drill the three hinge holes in one single working cycle
DRILL-BITS NOT INCLUDED
CODE: 00008393
Tool set made up of 3 drill-bits for hinges
Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter
Tool set made up of 3 drill-bits for hinges
CODE: 26845821
CODE: 26845820
Recommended drill-bit set
A selection of drill-bits by our technicians for a professional approach
CODE: 26054750
Kit of n° 2 stands for the side fences
To keep side fences always close at hand
Ref. gauge for reaf fence parallelism ( 500 mm)
CODE: 26000012
Ref. gauge for the quick set-up of the ref. stops along the fence
For the quick and accurate adjustment of the ref. stops along the fence
Ref. gauge for the quick set-up of the ref. stops along the fence (704 mm)
CODE: 26000059
Independent idle-roller table
To make the handling of large-size panels easier for the operator
Independent idle-roller table 500x1500 mm, adjustable height from 770 to 1.175 mm, max. capacity 45 Kg/m. It can be installed both sides of the machine
CODE: 27304100
Single-phase Motor
To have the machine working in small handcraft shops having an electric system running on 220 Vlts
"CSA" standards
Electrical standards abiding by the Canadian wiring regulations
Quick-change bush / chuck
By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"
CODE: 36000061