- Quick-change spindles
- 32 mm interaxis
- Pneumatig head rotation from 0° to 90°
- Well-dimensioned working table made of steel
- Boring-height adjustment on numeric counters
- Ready to be connected to a dust-collector
- Manufactured according to EC standards

- N.1 - 2HP Motor
- N.2 patented safety hold-down clamps
- N.5 quick-change chucks
- N.2, 1500 mm long, aluminium fences, with 2 ref. stops
- N.2 removable side-fences on working table, adjustable on high-precision numeric counters
- N.2 fixed ref. stops at 37 mm for hinges
- Boring-height adjustment on numeric counters
- Rear fence having 300 mm max. stroke
- Package:stackable carton box
- Ready to be connected to a dust- collector
- Manufactured according to EC standards

Свалете пълното описание  на машината в PDF

Safe Panel Hold-Down

The quick-positioning, safety, hold-down clamping units ensure the greatest stability and steadiness of the working piece during the working cycle and the highest accuracy of the drilling process.

Time

Two times faster than a bench top boring machine.

Quick And Accurate Panel Positioning

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).

Rear Fence

The rear fence, 300 mm stroke, allows to drill holes right in the middle of wardrobe side-panels, without using the long fence.

Fixed Stop For Hinges

The 37 mm fixed ref. stop is extremely useful to drill fixing holes for the hinges on side panels.

Solid Structure

Made of steel, built to last, eco-friendly, rust-resistant powder coating. Boring head is made of aluminium, while internal gears are made of rectified steel.

Quick And Accurate Panel Positioning

Thanks to the two aluminium fences 1500x 80 mm with 4 reference stops, (two are included, two are options).

Special Design To Work With Large-Diameter Drill-Bits

The comb has been designed so as to have 3 fixed positions where You can use cutter-drill bits of large diameter, without any further adjustment of the boring head.

Set of two ref.stops for drilling at 45° and 90°

To drill mouldings and laths

CODICE: 26000069 A / 26000069 B

Set of n° 2 additional ref. stops

For an even quicker and more accurate set up

CODICE: 26028819

Additional hold-down clamp

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process

N.1 additional hold-down clamp

CODICE: 29971019

Ref. pin for line drilling

To carry out the line vertical drilling process very quickly and accurately, without using the long fence. It is highly recommended to have this device both sides of the machine to process panels longer than 2 mt

Ref. pin for line drilling (1 piece)

CODICE: 29900100

Additional hold-down clamps

To increase the hold-down pressure on the working panel and consequently its stability during the drilling process. It allows to process two small panels at a time

N.2 additional hold-down clamps

CODICE: 29971020

Ref. gauge for reaf fence parallelism

For a quick and accurate set-up of the rear fence

Ref. gauge for reaf fence parallelism ( 500 mm)

CODE: 26000061

Kit to join the two aluminium fences

To get one single 3mt long fence

Kit to join the two aluminium fences (1500 + 1500 mm)

CODE: 26028820

Drilling aggregate for hinges, type "Grass"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008395

Drilling aggregate for hinges, type "Salice"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008391

Drilling aggregate for hinges, type "Blum"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008392

Drilling aggregate for hinges, type "Hettich"

To drill the three hinge holes in one single working cycle

DRILL-BITS NOT INCLUDED

CODE: 00008393

Tool set made up of 3 drill-bits for hinges

Recommended drill-bit set for drilling aggregate for hinges, made up of n. 2 left-handed drill-bits 8mm diameter and n.1 right-handed drill-bit 35 mm diameter

Tool set made up of 3 drill-bits for hinges

CODE: 26845821

Drilling aggregate for "Cabineo" connectors

To drill the holes for the "Cabineo" connectors in one single working cycle

Drilling aggregate for "Cabineo" connectors, including 3 drill-bits 15 mm diam.

CODE: 26845820

Recommended drill-bit set

A selection of drill-bits by our technicians for a professional approach

CODE: 26054750

Gauge for the symmetry of the side fences

For a quick and accurate adjustment of the two side fences on the working table, to obtain the perfect parallelism of the drilling process

Gauge for the symmetry of the side fences (only for BS 21 PRESTIGE)

Ref. gauge for the quick set-up of the ref. stops along the fence

For the quick and accurate adjustment of the ref. stops along the fence, when carrying out the line drilling process

Ref. gauge for the quick set-up of the ref. stops along the fence (640 mm)

Independent idle-roller table

To make the handling of large-size panels easier for the operator

Independent idle-roller table 500x1500 mm, adjustable height from 770 to 1.175 mm, max. capacity 45 Kg/m. It can be installed both sides of the machine

CODE: 27304100

Quick-change bush / chuck

By using these quick-change tool-holders, You can mount Your drill-bits on the boring head in just "one click"
CODE: 36000061